A major player in the IoT ecosystem is Sigfox. The network infrastructure started in France and is now in over 23 countries and expanding. Much of the business related information is available on the business forums. The purpose of this paper is to provide a high level technical overview of the Sigfox solution.

How is Sigfox Different ?

For wireless ISM bands, there is normally a receiver within the communications range of the sensors. The receiver acts as a gateway to the cloud and is normally powered at all times.

For Bluetooth based networks, a mobile application on a mobile device or a local gateway is the way to get the data to the cloud. Mobile devices can only receive data when the appropriate App is running on the mobile device (there are new technology developments that will be discussed in another paper). If a Bluetooth receiver is present, it will normally be powered all the time. The distance between the sensors and gateway is quite limited and this technology is more suited to proximity related and low range applications.

Sensors with Wi-Fi can push data directly to the cloud. Presence of a Wi-Fi network is mandatory and additional care has to be taken to ensure the sensors maintain and follow network changes especially in B2B installations where security measures can force periodic changes to the network security parameters. For battery powered sensors, they cannot be on the network all the time and have to join the network when they have to send data. When ‘Wi-Fi HaLow’ becomes available, it promises to overcome the difficulties and compete in the low power IoT arena.

Sensors with cellular interfaces (GPRS, 3G, 4G, etc) can push data directly to the cloud without the need of a gateway. These have a drawback in that the cost per sensor is higher, the SIM cards have to be managed and sensors cannot give the same battery performance as in low power networks. The registration time, power requirements to communicate with the cellular networks have to be carefully managed.

LoRaWAN and Neul based sensors and technology will be discussed in other papers.

Sigfox have addressed much of the difficulty mentioned above by providing an infrastructure that allows you to install a battery powered sensor without the need of a gateway, and the data is available on the cloud.

For companies wishing to develop products using this technology, it is important to join Sigfox as support is available through their approved partners (including Mesh-Net). To maintain the control, all products and modules have to be approved and registered with the Sigfox Network Operator (SNO). Just like cellular networks, there is a cost per device that will need to be discussed with the Network Operators.

Sigfox Approved Partners

As the network is growing, more players are getting involved in development and products. As they are all registered with Sigfox, the information is available from Sigfox as partners in a number of areas, including:

  • Chip Makers – Chipsets for Sigfox, including Texas Instruments, Atmel, Silicon Labs, On-Semiconductor
  • Module Makers / Kit Makers – These are companies that have developed and sell Sigfox approved modules. It is much easier to get a product to market as it eliminates the design and approval effort required for the RF design
  • Design Houses / Tech Hubs – Companies that can help you accelerate your development programs having previously designed or been involved a Sigfox product development
  • Platform Providers – IoT platform providers that have integrated data from the Sigfox portal

 

Devices – If you do not have the volumes to justify a development, you may find someone who has the product you need already available.

It will be helpful to select a partner (depending on your requirements) who can work with you from the start to end of project. Even though Sigfox are very responsive to direct enquiries and so should the Network Operators in your country, the partners generally have their own contacts to accelerate the responses should they need to contact them.

The Sensors

Sensors can be developed using chipsets or modules. The preference is based on the volumes expected for the product. All products have to be approved by Sigfox and this has to be taken into consideration at the component selection process.

The sensors can be battery powered and operate much the same as wireless sensors in the ISM bands. Most times they can wake, push the data and go back into sleep mode. The wake period is longer than for ISM sensors mainly due to the long range provided by the technology at low power.

By managing the upload times and using ‘report on exception’ techniques, sensors with 10 year battery life can be achieved.

The data packets sizes have a restriction (12 bytes) and the technology is mainly for small data sets. For larger data sets, multiple packets have to be sent and this technology is not suited for audio, video transfer or large amounts of data being streamed in real time.

The Wireless Technology

In the UK and Europe, Sigfox utilises the 868Mhz band at 14dBm, utilising two-way ultra-narrowband (UNB) technology. There are 2 channels, one for uplink and one for downlink. This allows products not only to send data to the Sigfox Portal but also to receive small data packets back, generally for configuration.

In addition to the packet size restrictions, the number of uploads and downloads are also controlled by Sigfox and the restriction must be adhered to.

Provided there is a Sigfox base station in your installation area, data transmitted from the sensor will be received and made available on the Sigfox Portal.

It is advisable to get a Sigfox kit from your preferred supplier and try out the communications. This can become the reference for your designs. Your product will be approved within a Class and as this becomes the performance indicator for your product, it is important to address this at the start of any project.

The Sigfox Portal

The Sigfox Portal receives and manages data from all Sigfox devices. It can receive data from the same sensor through multiple base stations and makes decisions, averages, and stores the most relevant data in the Portal.

Data is stored as it is sent with additional information such as Product ID and RSSI level of the signal received. Sigfox provide APIs’ (Application Programming Interfaces), to allow you to extract the data from their Portal.

The data is stored in the same format as transmitted by your sensor and the conversion of your data into useful data for your client is left to your software.

About Mesh-Net

Mesh-Net have developed Sigfox solutions for our clients. The involvement is from design to Sigfox approval. Our wireless experience allows us to understand and advise clients on the system design, selection process and design from conception to manufacture. As a result Mesh-Net are on the Sigfox partner network as a design house: https://partners.sigfox.com/companies/mesh-net-ltd .

Feel free to contact us for further information on sales@mesh-net.co.uk

What is the Internet of Things (IoT) ?

What is the Internet of Things (IoT) ?

The Internet of Things (IoT) provides devices with the ability to transfer sensor data on the Internet without requiring intervention. The name has evolved from the convergence of wireless technologies and the Internet. Many M2M companies have been providing sensors...

WiCub – WiFi IoT Sensor

WiCub – WiFi IoT Sensor

What is WiCub? WiCub is a small battery powered device that measures temperature and humidity, saves the readings and emails them to the user at the end of the day. If at anytime, the readings get out of the specified bands, an immediate email will be sent. Very...

Getting started with WiPy 1.0

Getting started with WiPy 1.0

WiPy is a nifty little Wi-Fi enabled module that is great for creating IoT applications using MicroPython. I have been experimenting with WiPy and want to show you how quickly this device can be setup for sending an e-mail using Gmail as well as synchronising its...

New website launched

New website launched

We’ve been busy working on our new website over the past couple of months and we’re delighted with the results. Our aim was to create a fresh new ‘look and feel’ which supports our core services and provides a showcase for our completed projects and industry case...